GRIS 2,5 mm

Superficie de corte GRIS de 2,5 mm para mesas de corte estáticas Atom

Superficie de corte GRIS de 2,5 mm para mesas estáticas Atom

Superficie de corte de alta densidad GRIS de 2,5 mm. para mesas de corte estáticas Atom. Especialmente desarrollado para permitir el paso de un elevado caudal de aire, ofrecer un importante coeficiente de agarre y una óptima resistencia al corte (larga vida). Especialmente recomendado para sistemas de vacío no sectorizados con el uso de la herramienta EOT (eléctrica).

Disponible
FLASH CUT 222

Atom FLASH CUT 222 - 600x1000x2,5 mm / Superficie de corte alta...

Atom
HTUL-025FHC100.060
40,43 €
Cutting underlay for static cutters. Same specificities of the HTUL-040 but with a higher air flow transmission. Specially recommended for very complexes cutting works on complexes materials (the suede, etc...).
Disponible
FLASH CUT 888

Atom FLASH CUT 888 - 600x1600x2,5 mm / Superficie de corte alta...

Atom
HTUL-025FHC160.060
64,69 €
Cutting underlay for static cutters. Same specificities of the HTUL-040 but with a higher air flow transmission. Specially recommended for very complexes cutting works on complexes materials (the suede, etc...).
Disponible
FLASH CUT 1610

Atom FLASH CUT 1610 - 1000x1600x2,5 mm / Superficie de corte alta...

Atom
HTUL-025FHC160.100
64,69 €
Cutting underlay for static cutters. Same specificities of the HTUL-040 but with a higher air flow transmission. Specially recommended for very complexes cutting works on complexes materials (the suede, etc...).
Disponible
FLASH CUT 2510

Atom FLASH CUT 2510 - 1000x2500x2,5 mm / Superficie de corte alta...

Atom
HTUL-025FHC250.100
101,07 €
Cutting underlay for static cutters. Same specificities of the HTUL-040 but with a higher air flow transmission. Specially recommended for very complexes cutting works on complexes materials (the suede, etc...).
Disponible
FLASH CUT 888 L30

Atom FLASH CUT 888 L30 - 1000x3000x2,5 mm / Superficie de corte...

Atom
HTUL-025FHC300.100n
121,29 €
Cutting underlay for static cutters. Same specificities of the HTUL-040 but with a higher air flow transmission. Specially recommended for very complexes cutting works on complexes materials (the suede, etc...).
Disponible
FLASH CUT 3010

Atom FLASH CUT 3010 - 1000x3000x2,5 mm / Superficie de corte alta...

Atom
HTUL-025FHC300.100
121,29 €
Cutting underlay for static cutters. Same specificities of the HTUL-040 but with a higher air flow transmission. Specially recommended for very complexes cutting works on complexes materials (the suede, etc...).
Mostrando 1-15 de 15 artículo(s)
Product added to wishlist
Product added to compare.

Uso de cookies: De acuerdo con la legislación vigente le informamos que esta web usa cookies para mejorar la experiencia de navegación así como para fines estadísticos. Al continuar con la navegación entendemos que se acepta nuestra POLITICA DE COOKIES