GRIS 2,5 mm

Superficie de corte GRIS de 2,5 mm para mesas estáticas

Superficie de corte GRIS de 2,5 mm para mesas estáticas Teseo

Superficie de corte de alta densidad GRIS de 2,5 mm. para mesas de corte estáticas. Especialmente desarrollado para permitir el paso de un elevado caudal de aire, ofrecer un importante coeficiente de agarre y una óptima resistencia al corte (larga vida). Especialmente recomendado para sistemas de vacío no sectorizados con el uso de la herramienta EOT (eléctrica).

Disponible
FC4-240

Teseo FC4-240 - 1100x2500x2,5 mm / Superficie de corte alta...

Teseo
HTUL-025FC4240.110
141,24 €
Cutting underlay for static cutters. Same specificities of the HTUL-040 but with a higher air flow transmission. Specially recommended for very complexes cutting works on complexes materials (the suede, etc...). 1 piece
Disponible
FC4-300

Teseo FC4-300 - 1000x3000x2,5 mm / Superficie de corte alta...

Teseo
HTUL-025FC4300.100
168,30 €
Cutting underlay for static cutters. Same specificities of the HTUL-040 but with a higher air flow transmission. Specially recommended for very complexes cutting works on complexes materials (the suede, etc...). 1 piece
Disponible
FC4-320

Teseo FC4-320 - 1200x3200x2,5 mm / Superficie de corte alta...

Teseo
HTUL-025FC4320.120
155,25 €
Cutting underlay for static cutters. Same specificities of the HTUL-040 but with a higher air flow transmission. Specially recommended for very complexes cutting works on complexes materials (the suede, etc...). 1 piece
Disponible
FC4-400

Teseo FC4-400 - 1400x4000x2,5 mm / Superficie de corte alta...

Teseo
HTUL-025FC4400.140
323,44 €
Cutting underlay for static cutters. Same specificities of the HTUL-040 but with a higher air flow transmission. Specially recommended for very complexes cutting works on complexes materials (the suede, etc...). 1 piece
Disponible
FC4-560

Teseo FC4-560 - 1400x5600x2,5 mm / Superficie de corte alta...

Teseo
HTUL-025FC4560.140
452,81 €
Cutting underlay for static cutters. Same specificities of the HTUL-040 but with a higher air flow transmission. Specially recommended for very complexes cutting works on complexes materials (the suede, etc...). 1 piece
Disponible
OMEGA

Teseo OMEGA - 2800x3000x2,5 mm / Superficie de corte alta densidad...

Teseo
HTUL-025OGA300.280
485,15 €
Cutting underlay for static cutters. Same specificities of the HTUL-040 but with a higher air flow transmission. Specially recommended for very complexes cutting works on complexes materials (the suede, etc...). 2 pieces
Mostrando 1-7 de 7 artículo(s)
Product added to wishlist
Product added to compare.

Uso de cookies: De acuerdo con la legislación vigente le informamos que esta web usa cookies para mejorar la experiencia de navegación así como para fines estadísticos. Al continuar con la navegación entendemos que se acepta nuestra POLITICA DE COOKIES